String lights will not hurt a healthy tree or shrub if you use cool-running LED strands, drape or loosely spiral them instead of wrapping tightly, never nail or staple into bark, and take them down within a few months. The real risks are a strand left on for years that cuts into growing bark, warm bulbs pressed against leaves or needles, and heavy strands on brittle branches. Put the lights on a timer so the plant also gets a dark night.
How lights can harm a plant
Lights themselves rarely damage a tree. The trouble comes from how they are hung and how long they stay up.
- Girdling: a wire wrapped tightly around a trunk or branch does not stretch. As the wood grows wider, the wire presses into the bark and can cut off the layer that carries water and sugar. This happens slowly, so it is easy to miss on lights left up all year.
- Heat: older incandescent mini bulbs get warm. Pressed against soft leaves or evergreen needles for weeks, they can leave brown scorched spots. LED bulbs run far cooler.
- Wounds: nails, staples, and screws open the bark to rot and insects. Clips that pinch the bark do the same on a smaller scale.
- Weight and breakage: a long run of heavy strands, plus snow or ice, can bend or snap thin or brittle branches.
- Rough removal: yanking strands off in a hurry strips buds and small twigs.
🌱 Get Personalized Plant Picks
Answer a few quick questions and we’ll match plants to your exact yard conditions.
Find My Plants →The safest way to hang them
- Choose LED strands. They run cool, use less power, and are lighter than older strands. Look for lights rated for outdoor use.
- Drape, do not cinch. On shrubs, lay strands over the outside like a loose net. On trees, run a loose spiral up the trunk with a gap you can slide a few fingers into, and leave slack at every turn.
- Work from branch tips inward. Lay strands along the outer branches rather than pulling them tight around the trunk. This shows off the shape and keeps pressure off the main stem.
- Use soft ties or hooks. Soft plant ties or plastic hooks hold a strand in place without biting into the bark. Never use nails, staples, or wire.
- Spread the weight. Keep heavy runs on sturdy limbs, and avoid hanging anything from thin whips or brittle wood. A snow load guide for upright evergreens shows how quickly snow adds weight.
- Keep bulbs off foliage when you can. Let bulbs hang between leaves or needles rather than buried in them, especially on evergreens with soft growth.
Shop outdoor lighting basics on Amazon
LED string lights that run cool, a plug-in timer so lights go off overnight, soft ties that will not cut bark, and a weatherproof extension cord. We may earn a commission at no extra cost to you.
Amazon · LED string lights Amazon · Outdoor timer Amazon · Soft plant ties Amazon · Outdoor extension cord
Use a timer so plants get a dark night
Many trees and shrubs read day length as a signal. Research on trees near streetlights has found that steady night lighting can delay leaf drop and change bud timing in some species. A strand that runs for a few hours each evening is very different from a bright light all night, every night. A simple outdoor timer that turns lights off by bedtime protects the plant's dark period and saves power too.
How long can lights stay up?
Plan on taking strands down within two or three months. Leaving lights on a tree all year is the most common way they cause harm, because the plant keeps growing around the wire. If you want lights in a tree year round, check every few months, loosen or move every tie, and reset any wire that has started to press into the bark.
On fruit trees and flowering shrubs, remove lights before buds start to swell. Pulling strands through swollen buds knocks them off. It also clears the way for dormant pruning and other cleanup.
Taking them down without damage
- Unwind strands in the reverse order you put them up, instead of pulling from one end.
- Cut tangled ties with snips rather than tearing them free.
- Check the bark where strands and ties sat. A shallow mark will heal. Wire that has sunk into the bark should be cut out carefully in short pieces rather than ripped out.
- Store strands on a reel or a piece of cardboard so they come out untangled next time, which means less tugging on branches.
Young trees and evergreens
Young trees have thin bark and grow quickly, so a tight wrap can cause damage within one growing period. Keep lights on young trees to a loose drape, and if the trunk is wrapped for frost cracks, read our tree wrap and trunk guard guide first so the lights do not trap moisture under the wrap.
Evergreens hold their needles through the cold months, and dry wind can brown them. Avoid crowding bulbs into the foliage and avoid adding stress to a plant that is already struggling. Our anti-desiccant spray guide explains when a winter coating helps, and our evergreen wreath care guide covers keeping cut greens fresh near lights.
Shop hanging and storage helpers on Amazon
A light hanging pole for high branches, covers for cord connections, a reel to store strands without tangles, and pruning snips for tidying up after. We may earn a commission at no extra cost to you.
Amazon · Light hanging pole Amazon · Cord connection cover Amazon · Light storage reel Amazon · Pruning snips
Electrical and pet safety
- Use only cords and lights rated for outdoor use, and plug them into an outlet protected against ground faults.
- Keep plug connections off wet ground and covered.
- Do not run cords through standing water or where people will trip on them.
- Pets may chew cords and bulbs. Keep low strands and cords out of reach, and unplug lights when no one is home. If a pet chews a cord or swallows a bulb, call a veterinarian or the ASPCA Animal Poison Control Center at (888) 426-4435.
Common problems
- Brown spots near bulbs: bulbs are too warm or pressed into the foliage. Switch to LED and let bulbs hang free.
- A groove in the bark: the strand stayed too long or too tight. Remove it and let the tree callus over.
- Broken tips: too much weight on thin branches. Move strands to sturdier wood.
- Lights going dark after rain: water in a connection. Cover connections and keep plugs off the ground.
Bottom line
Drape cool-running LED strands loosely, hold them with soft ties, keep heavy runs on strong branches, and use a timer so lights go off at night. Take strands down within a few months and check the bark when you do. Done that way, lights leave the plant just as healthy as they found it. For more outdoor cold-month displays, see our evergreen window box guide.
Related reading
- Evergreen wreath freshness care
- Evergreen window boxes for the cold months
- Anti-desiccant spray for evergreens
- Tree wrap and trunk guards for cold zones
Ready to match plants to your location? Try the PlantWise Plant Finder →